Time To Perm!

This guide explains how to use the Loader Spoofer and verify that the changes were applied successfully. ⚠️ Important: Always save your original serial information before running the spoofer.

Step 1 — Download the Loader

Download the Loader application from the link provided.

Save the file somewhere easy to access, such as:

• Desktop

• Downloads

• Documents

Step 2 — Run the Checker

Before running the spoofer, you need to record your current system serials.

1. Locate the file:

Checker.bat

1. Double-click the file to run it.

The script will display your current system serials.

Step 3 — Save Your Serials

You must back up your serial information.

How to save them

1. Open Snipping Tool (or another screenshot tool).

2. Capture the entire window displaying the serial information.

3. Save the screenshot to a secure location.

Recommended locations:

• Desktop

• Downloads

• Private backup folder

⚠️ Do not skip this step. This is required to confirm the spoof worked.

Step 4 — Disconnect Your USB Device

Before running the spoofer:

• Make sure any USB devices used earlier are unplugged.

This prevents conflicts during the spoof process.

Step 5 — Run the Spoofer

1. Open the Spoofer application.

2. Enter your license key when prompted.

The spoof process will begin.

⚠️ Important: Do not use your PC or interact with any applications while the spoofer is running.

Wait until the program displays:

Spoofing completed

Step 6 — Restart Your PC

Once the spoofing process finishes:

1. Restart your computer immediately.

2. Allow Windows to boot normally.

Step 7 — Verify the Changes

After your PC restarts:

1. Run the file again:

Checker.bat

1. Review the updated serial information.

Compare the Results

Compare the new serial values with the screenshot you saved earlier.

Confirm that the serials have changed.

If the serial numbers are different, the spoof process was successful.

⚠️ If the serials did not change: Run the spoofer again or contact support.